Mbt-lighting LZ600RG Instrukcja Użytkownika Pobierz pdf

LZ600RG Red & Green Laser Burst User Manual

Thanks for purchasing LZ600RG Red & Green Laser Burst.

Please read this manual carefully and thoroughly, as it gives important information regarding safety

and operation instruction. Keep this manual in order to consult it in the future.

The quality of every set of the products is guaranteed in the factory before the shipment. Please

check the accessories as the packing list inside. If the carton appears to be damaged, please inspect

the fixture carefully. In case damage has been found or some parts are missing, please contact our

after service department before shipping back the product.

Safety Information：

1. Always ground the fixture electrically properly.

2. For indoor use only. Keep in cool and dry place with the ambient temperature of 10-35℃. Put the

fixture in steady place and do not shake.

3. Continuous operation of over 4 hours will shorten the life of the laser. Please always keep within

4 hours.

4. The lens at the aperture will be covered with dirt and dust that will decrease the power output.

Please clean it with the soft cloths or paper periodically.

5. Do not attempt to tear off the warranty paper. Such action will avoid the company’s warranty.

6. Do not attempt to dismantle the fixture if problems happen. Please connect with our after service

department directly.

7. Do not throw away the packing material. If problems happen, please pack the product with the

material and send back to Neo-Laser after service department

Fuse Replacement

Note: Replace the fuse with the same specified. If not, the potential damage will be avoided of the

company’s responsibility.

Replace the fuse：Disconnect the power, use the screwdriver to unscrew the fuse holder, take out

the fuse, place it with the good one of the same specified and finally screw the fuse tight.

1 2 3 4 5 6

1 LZ600RG Red & Green Laser Burst User Manual Thanks for purchasing LZ600RG Red & Green Laser Burst. Please read this manual carefully and

2 Technical Specification: 1． AC Power：AC 110 V / 220V, 60 / 50 HZ, Fuse (2A) 2． Laser： Wavelength 532nm, Green, Power 40mW ; Wav

3 DIPSWITCH SETTING IN AUTO MODE 1. #2: Red color 2. #3: Green color 3. #4: right rotation slow 4. #5: right rotation medinum 5. #4 and #5: rig

4 237～255 Sound Red/Green CH2 MOTOR 0～4 Motor Stop 5～125 Right Rotate(slow—medium--fast) 126～131 Motor Stop 132～249 Left Rotate (slow—medium

5 DMX Mode: 1. Use standard DMX512 console in DMX Mode. 2. Mode settings: set the dipswitch in corresponding position, that is DMX Mode：＃10－1. 3. Co

6 1 1 1 0 0 7 39 71 103 135 167 199 231 263 295 327 359 391 423 455 487 0 0 0 1 0 8 40 72 104 136 168 200 232 264 296 328 360 392 424 456 488 1 0 0 1

Brak uwag

Mbt-lighting LZ600RG Instrukcja Użytkownika